products

Contact us


Mobile: +86 136 4146 3250
Address: Bldg.1B, Longgang Str., LongguangHua District,Shenzhen,Guangdong,China

Home  >  ONU
Loading...
1GE+CATV ONU
Category : ONU
Hits : 32
Brief : 

XPON ONU 1GE 

  • Description
  • Inquiry

Overview

1GE CATV is designed as HGU (Home Gateway Unit) in different FTTH solutions; the carrier-class FTTH application provides data service access.

1GE CATV is based on mature and stable, cost-effective XPON technology. It can switch automatically with EPON and GPON mode when it access to the EPON OLT or GPON OLT.

1GE CATV adopts high reliability, easy management, configuration flexibility and good quality of service (QoS) guarantees to meet the technical performance of the module of China Telecom EPON CTC3.0.

1GE CATV is fully compliant with technical regulations such as ITU-T G.984.x and IEEE802.3ah.

1GE CATV is designed by Realtek chipset 9601D

 

Feature

Supports Dual Mode (can access GPON/EPON OLT).

Supports SFU and HGU of EPON CTC 3.0 standard

Supports GPON G.984/G.988 standards and IEEE802.3ah.

Support CATV interface for Video Service and remote control by Major OLT

Support NAT, Firewall function.

Support Flow & Storm Control , Loop Detection, Port Forwarding and Loop-Detect

Support port mode of vlan configuration

Support LAN IP and DHCP Server configuration

Support TR069 Remote Configuration and maintenance

Support Route PPPoE/DHCP/Static IP and Bridge mixed mode

Support IPv4/IPv6 dual stack

Support IGMPv2, IGMPv3, MLDv1, MLDv2, IGMP snooping/proxy

Compatible with popular OLT(HW, ZTE, FiberHome...)

 

Specification

Technical Item

Details

Pon interface

1 GPON/EPON port(EPON PX20+ and GPON Class B+)

Upstream: 1310nm, Downstream: 1490nm

SC/APC connector

Receiving sensitivity: ≤-28dBm

Transmitting optical power: 0~+4dBm

Transmission distance: 20KM

LAN interface

10/100/1000Mbps auto adaptive Ethernet interfaces.

10/100/1000M Full/Half, RJ45 connector

CATV Interface

RF, optical power : +2~-18dBm

Optical reflection loss: 45dB

Optical receiving wavelength: 1550±10nm

RF frequency range: 47~1000MHz,  RF output impedance: 75Ω

RF output level: 82dBuV-7dBm optical input

AGC range: +2~-7dBm/-4~-13dBm/-5~-14dBm

MER: 32dB(-14dBm optical input), 35(-10dBm)

LED

6 LED, For Status of POWER, LOS, PON, LAN, NORMAL, WARN

Push-Button

2, for Function of Power on/off, Reset

Operating condition

Temperature : 050

Humidity :10%90%non-condensing

Storing Condition

Temperature : -40+60

Humidity :10%90%non-condensing

Power supply

DC 12V/1A

Power Consumption

<3W

Net Weight

<0.2kg

 

Panel lights and Introduction

Pilot

Status

Description

POWER

On

The device is powered up.

Off

The device is powered down.

LOS

Blink

The device doses not receive optical signals.

Off

The device has received optical signal.

PON

On

The device has registered to the PON system.

Blink

The device is registering the PON system.

Off

The device registration is incorrect.

LAN

On

Port is connected properly (LINK).

Blink

Port is sending or/and receiving data (ACT).

Off

Port connection exception or not connected.

NORMAL

On

Input optical power is between -18dbm and 2dBm

Off

Input optical power is higher than 3dbm or lower than -18dBm

WARN

On

Input optical power is higher than 2dBm or lower than -18dBm

Off

Input optical power is between -18dBm and 2dBm

 

Application

Typical SolutionFTTO(Office)FTTB(Building)FTTH(Home)

Typical ServiceBroadband Internet access, IPTV, VOD, CATV and Video Surveillance.

Product Name:     *
Name:     *
Mobile:     *
Tel:   
Fax:   
E_mail:    *
Address:   
Content:     *
      
Online