products

Contact us


Mobile: +86 136 4146 3250
Address: Bldg.1B, Longgang Str., LongguangHua District,Shenzhen,Guangdong,China

Home  >  Optic Transmitter
Loading...
Fiber Optical Switch
Category : Optic Transmitter
Hits : 60
Brief : 

Fiber optical switch

  • Description
  • Inquiry

Technique Parameter

Type


Ordinary type

Enhanced type


Item

Unit

Technique parameter

Remark

Wavelength

nm

1200 – 1600

1200 – 1600


Insertion loss

dB

≤1.5

≤1.5

Testing at 1310nm, 1490nm, 1550nm

Switching time

ms

≤ 5

≤ 5


Return loss

dB

≥ 55

≥ 55


Max input optical power

mW

500

500


Input optical power operating range

dBm

-10dBm - +23dBm

-10dBm - +23dBm


Switching life


≥10 million times

≥10 million times


SNMP module

Support IPV6/HFC network management/IE browser

SNMP module Optional

Optical connector type


FC/APC or SC/APC

FC/APC or SC/APC


Power adapater

V

IN:AC100V - 260V

OUT:DC5V 

IN:AC100V - 260V

OUT:DC5V 


Consumption

W

≤ 2

≤ 2


Operating temperature

-5 - +55

-5 - +55


Max relative humidity for working

%

Max 95% No condensation

Max 95% No condensation


Storage Temperature

-30 - +70

-30 - +70


Max relative humidity for storage

%

Max 95% No condensation

Max 95% No condensation


Mini Dimension

mm

235(W)×160(D)×30(H)

235(W)×160(D)×30(H)


 

 

 

 

FIBER OPTIC SWITCH – MINI front front panel description

solution.jpg 

1)  Power indicator: when the power inside is working, the light is on.

2)  A way output status indicator: When switch is at A, the light is on.

3)  B way output status indicator: When switch is at B, the light is on.

4)  Warning indicator: When warn, red light is on, and detail please refer to menu.  

5)  Exit or cancel key of the display setup menu.

6)  Up or increment key of the display setup menu.

7) Down or decrement key of the display setup menu.

8) Enter key of the display setup menu.

9) 160×32 dot matrix LCD monitor: Used for displaying all parameters.

10) LAN interface: correspond to IEEE802.3 10Base-T interface, used for network management. 

11) A way optical signal input.

12) B way optical signal input.

13) Optical signal output: There is an invisible laser beam from the port when normal working, so should not face to body or eye to avoid accidental harm.

14)   Power input.

15)   RS232 interface: Used for configuring the network management parameters.


Product Name:     *
Name:     *
Mobile:     *
Tel:   
Fax:   
E_mail:    *
Address:   
Content:     *
      
Online